| Customization: | Available |
|---|---|
| Function: | Hot Oil Heater |
| Fuel: | Gas-Fired |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Introduction of Hot Industrial Natural Gas Thermal Oil Heater, Thermal Oil Boiler
YY (Q) W series of organic heat carrier boiler is quick-fitting forced circulation fuel oil (gas) boiler, this series boiler's is compact structure, the heating area is constituted by closed coil pipes from inside, outside (or internal and external), inside coil pipes are the radiation heating surface. Fuel in inside the inner coil pipe form the combustion chamber, the fuel burn inside and release heat and absorb most of the quantity of heat after radiation heating, high temperature flue gas transfer heat through convection heating surface, then go into the air preheater (or waste heat boiler) to heat the required air (or water), the low temperature flue gas from boiler discharge directly to the chimney then to the atmosphere.
2. Product details of Horizontal and Industrial Natural Gas Fired thermal oil heater/hot oil boiler
| Model | YY(Q)W hot oil heater / thermic fluid boiler |
| Fuel | Natural gas,LPG,CNG,LNG,Diesel,heavy oil ,city gas fired /burning |
| Output | hot oil |
| Structure | coil pipe |
| Capacity | 0.7Mw 1.4Mw 2.8Mw 4.2Mw 5.6Mw 7 Mw,1 ton ,2 ton 4 ton 6 ton 8 ton 10 ton |
| Type | Horizontal type package boiler |
| Usage | food factory,rubber factory,plywood factory,drying,oil refinery |
3. Features of Hot Industrial Natural Gas Thermal Oil Heater, Thermal Oil Boiler
1).Easy and convenient to install the boiler, only setting the boiler on the foundation.
2).Heating surface is formed by round coilers, sufficient arrangement, reducing thermal load of tubes surface to ensure safety.
3).Furnace dimensions is matching with the combustion flame, positive pressure combustion, high radiation heat exchange efficiency.
4). Boiler structure is compact, saving the floor area of boiler room.
5).An air pre-heater or heat recovery boiler is placed behind the boiler to improve the thermal efficiency.
4. Technical parameter of Hot Industrial Natural Gas Thermal Oil Heater, Thermal Oil Boiler
|
Item Model |
YYW350 Y(Q) |
YYW700 Y(Q) |
YYW1400 Y(Q) |
YYW2100 Y(Q) |
YYW2800 Y(Q) |
YYW4200 Y(Q) |
|
Capacity104kcal/h |
30 |
60 |
120 |
180 |
240 |
360 |
|
Capacity MW |
0.35 |
0.7 |
1.4 |
2.1 |
2.8 |
4.2 |
|
Thermal Efficiency % |
80 |
80 |
83 |
83 |
83 |
83 |
|
Pressure Mpa |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
|
Max. Temp. °C |
320 |
320 |
320 |
320 |
320 |
320 |
|
Circulation Oil m3/h |
40 |
80 |
160 |
240 |
320 |
480 |
|
Connection Pipe Size (mm) |
80 |
100 |
125 |
125 |
200 |
200 |
|
Fuel applicable |
Diesel oil,heavy oil,Lpg,Natural gas |
|||||
5. Installation sites
6.Packing and shipping
){kind=link}